	Shop

Topeak JOE BLOW SPRINT - ALLOY SILVER ALLOY BARREL, STEEL BASE (FLOOR PUMP)

Zoom

Topeak JOE BLOW SPRINT - ALLOY SILVER ALLOY BARREL, STEEL BASE (FLOOR PUMP)

(40 customer reviews)

SKU:

PUMP12303

In Stock

Availability: Usually ships in 1-2 business days

Only 1 left in stock, order soon!

Topeak JOE BLOW SPRINT - ALLOY SILVER ALLOY BARREL, STEEL BASE (FLOOR PUMP)

List Price:
Our Price:	$63.98
You Save:

Product Details

Product Length:	32.75 inches
Product Width:	10.25 inches
Product Height:	5.75 inches
Product Weight:	0.25 pounds
Package Length:	34.65 inches
Package Width:	14.17 inches
Package Height:	5.91 inches
Package Weight:	3.44 pounds
Average Customer Rating:	based on 40 reviews

Features

Aluminum barrel with steel base
TwinHead fits both Presta and Schrader valves
Top-mounted gauge rated to 160 psi
Includes ball & air bladder needles

Customer Reviews

Average Customer Review: 4.5

( 40 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

32 of 32 found the following review helpful:

Built to last, easy to pump. Oct 26, 2006 By Tatnai Burnett
Great pump. Key aspects:

1) Steal base is wide and stable.

2) Pressure guage is located at top of shaft. It is easy to read as far as pump guages go.

3) Pumping is effortless. I attached it to my mini-van tires, and with a good deal of pumping, was able to top off the pressure. Not more convenient than a air compressor, but definitely do-able in 5 - 10 min of pumping if you need to do it.

4) Pressure guage is accurate, and includes a bleed valve so that you can release air without removing the hose from the valve.

Only complaint: the T-type valve adapter is just a little bulky. It could be a problem if you need to get it into a really tight space (this problem is very unlikely for the typical user, but possible I think). A cheap valve extender from your local sports store would fix this problem if it occurs, and it may be worth the hassle to have both schrader and presta adapters permanently affixed to the pump.

Definitely a good buy. Would highly recommend, and would definitely buy it again.

29 of 30 found the following review helpful:

Not quite as thrilled as the previous reviewers. May 14, 2007 By R. Tucker
The pump didn't work when I took it out of the box - the Shrader side of the valve leaked air out as fast as I could pump it in (using the Presta side of the head). The good news is I e-mailed Topeak and they immediately sent a replacement head. I swapped it out and was back in business. -1 for quality control, +1 for customer service.

After figuring out a couple of quirks of this pump, I am now satisfied with it. To me, it is a bit of a clumsy operation to get the head firmly seated on the valve and then flip over the lever to lock it down. The tendency is to bend the valve - you really have to hold the head firmly while locking it down to make sure you don't damage the valve.

Also, you have to pump till the gauge shows WAY more than you want in the tire to overcome the seal of the Presta valve (yes, I do purge the valve after opening it). Once the valve pops, the pressure reading is accurate and you can start filling the tire. I'm sorta' new to Presta valves and don't know if this is common, but it was not a problem with either of my Topeak Road Morph pumps. (GREAT on-bike pump, by the way.) Hope this helps someone.

15 of 15 found the following review helpful:

Topeak - JoeBlow - Great customer service Jul 16, 2008 By Idaho Bike Rider
In 2005 I purchased a Topeak - JoeBlow - Sprint floor pump which I didn't use much in 2007. Anyhow, a couple of weeks ago it got so that it was unable to reach 120 psi without leaking. I went to the Topeak website and contacted the company. They sent a rebuild kit which consisted of a washer and a couple of springs. That did not do the trick. I wrote again (their website states that if you describe where the pump is leaking they will send the correct part). I did that, and today received a complete replacement of the gauge assembly. That has to be over 50% of the value of the pump. I installed it and the pump operates like new. So if you need a floor pump in the future, I recommend a Topeak - JoeBlow.

4 of 4 found the following review helpful:

Terrific Pump! May 07, 2009 By James B. Sprouse "jbs"
Purchased this to replace a new Blacburn Tower 3 pump that I purchased that had a lousy valve design (stear clear of it!)....will be going back to the local bike store ASAP.

Topeak pump is very smooth...easy to attach/detach...easy to inflate...and very durable construction. I was worried from the picture about it's valve design, but the lever is metal and the whole thing works perfectly and very durable.

3 of 3 found the following review helpful:

joe blow doesnt blow Nov 30, 2009 By R. Caurant "Super Genius"
needed floor pump since i ride all year long,even in snow. cold weather kills tire pressure. researched and based on other reviews bought it. easy to use and pumps fast. like the rotating pressure gauge, since i fill front and back at 2 different pressures. makes it fast and easy read. highly recommend.

See all 40 customer reviews on Amazon.com