26 x 1-3/8" x 1-1/4" tire. Black. 65 PSI. S6. Kenda. This tire will fit the Schwinn S6 rims only. Please make sure your old tire says S6 on the side wall.
List Price:
You Save:
Product Details
Product Length:
26.5 inches
Product Width:
26.25 inches
Product Height:
1.0 inches
Product Weight:
1.19 pounds
Package Length:
26.0 inches
Package Width:
26.0 inches
Package Height:
1.1 inches
Package Weight:
1.2 pounds
Average Customer Rating:
based on 2 reviews
Customer Reviews
Average Customer Review: ( 2 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
2 of 2 found the following review helpful:
Still a little tight Jun 19, 2011
By Grumbler
"Grumbler"
After getting schooled the hard way about the differences between schwinn sizing and everyone else sizing (schwinn size is larger than the measurements would suggest), I found it a little frustrating that these tires still seemed a bit tight. I had to pump my tire up to 95 pounds and liberally apply WD-40 to the rim to get it to seat all the way around properly.
After this was done though i was able to back it down to 60psi and the tires give a good ride.
Good tire, but do you have another choice? Oct 13, 2011
By Dellorto
"Dellorto"
Kenda makes the only tire that will fit my Schwinn 3-speed. Fortunately the tire quality appears relatively decent and has a vintage look to the tread pattern. Like the previous reviewer, I found setting the bead onto the rim difficult. My suggestion is to use window cleaner (such as Windex) to lubricate the tire and rim and over-inflate to around 80-90 psi. I found myself deflating the tire a couple of times to ~10 psi to manually move the sections of the tire that didn't want to bead properly. Then add some more window cleaner and inflate to around 80-90 psi. Don't forget to reduce the pressure to 60 psi!
based on 2 reviews
