|
|
 Best Sellers | | |  | |  | | | | | | | | SKU:
| | Availability:
Out of stock | | | | | | | | | | | |
|
| | Product Details | | Product Length: | 0.0 inches | | Product Width: | 0.0 inches | | Product Height: | 0.0 inches | | Product Weight: | 5.0 pounds | | Package Length: | 19.2 inches | | Package Width: | 12.0 inches | | Package Height: | 3.5 inches | | Package Weight: | 1.55 pounds | | Average Customer Rating: |  based on 26 reviews |
| |
| | Customer Reviews | Average Customer Review: ( 26 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
8 of 8 found the following review helpful:
It works Aug 24, 2007
By allgoo19
It's made cheaply both material and the workmanship. It's made of relatively soft metal like chrome colored brass. Bright side of this is it's easy to cut, so if the wheel of you bicycle goes way up high, you can cut it lower with a hack saw with relative ease, at least easier than cutting steel. It supports the weight of a bicycle pretty well but you can't sit on the bike while it's on the stand, of course. Even when I cranked the pedal to the full speed, it was stable to reasonable level. It could have been a better design with hollow aluminium(or good quality steel tube) and lighter and I would have happily paid the higher price for it. The bottom line is this. It's not the most refined looking stand but it works for its purpose and I recommend it to anyone who needs a simple portable bike stand for on location repair or adjustment.
4 of 4 found the following review helpful:
 Works!! Nov 09, 2007
By danielinjersey
Works fine. Raises rear tire approximately 4" off the ground. Good for adjustments or some repairs. Great value!
8 of 10 found the following review helpful:
 NOT for Trek Mountain Bikes Jun 27, 2008
By Drake
I just received this stand and went to try it on my Trek 4500 and did not fit, not only did it not fit, but put some scratched on my bike :o(. So now I'm stuck with this stand that will most likely not do anything for me. It's not worth returning it. I paid $8.49 for the stand and the same for shipping. $16.98 total. It will cost me about $5 to ship it back so I will only get $3 back after it's all said and done which to me is not worth it.
If you plan on using this on a Trek Mountain bike look elsewhere, it will not fit and will scratch it. :o(
3 of 3 found the following review helpful:
 For The Old Aug 17, 2010
By D. Scott Ayler
I have 2 very modern bikes. The frames have oversized downtubes. One frame is aluminum, the other high-end carbon. The bend on this stand (where it hooks around the downtube) does not fit either frame. Would recommend this to someone who rides steel frame bicycles. It is ideal for those that have smaller diameter tubes.
For the modern bikes, this product is USELESS.
3 of 3 found the following review helpful:
Awesome "Kickstand" Oct 24, 2009
By Clark L. Mcsparren
"Happy amazon.com shopper"
The Pyramid Bottom Bracket Type Display Stand is an awesome item to take the place of a traditional kickstand. I don't need to add weight to the bike while riding. The stand is waiting for me in my garage when I return from my ride. A few minutes after returning from my ride I am easily able to safely secure my bike in a stable upright position, reducing the potential for the bike being damaged through falling or knocking against an rough textured adjacent cinder brick wall. Couldn't be happier. Sturdy, and well coated to protect the bike frame from any damage from the stand. Also, raising the back tire allows for routine maintenance of the drive and back wheel components. If your looking for a low cost, simple way to protect and maintain your bicycle investment, this is it!
See all 26 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ... |
|
|
